Footwear Testing

You can recognize and manage quality issues by working with us as we provide inspection and testing for the whole footwear range. Basil can test any sort footwear, including athletic and children's shoes, safety and personal protective equipment (PPE) shoes, and luxury fashion shoes. We at BASIL understand that an accurate testing of footwear is necessary to ensure that it complies with the law.

We examine the mechanical and physical characteristics of your items in accordance with your approved quality standards (AQL ) and Conduct product safety inspections.

We adhere to national, European, and worldwide standards, directives, and test procedures.

There Are Two Types Of Test Basil Provide In Footwear

Physical Testing
Chemical Testing
    Physical Testing Includes:
  • Bally flex
  • Ross flex
  • Colorfastness and rub testing
  • Seams strength
  • Zippers Testing
  • Lace testing
  • Leakage testing
  • Slip resistance test
  • Completed shoes flexion
  • Bonding strength
  • Abrasion resistance of Outsoles
  • Vamp flexing tester
Chemical Testing includes:
  • Restricted and hazardous substances
  • Chemical smart screening
  • Consumer Safety Improvement Act Testing and compliance solution
  • GB Testing

Basil provides wide range of testing category. You name it and we have it. Our range of categories are not only limited to the above categories but it’s lot more than that . If you want more information you can connect with us and we are here to serve you with the best of the services.

Standard protocols that we follow:
UK/ EU
  • EN ISO 20344:2011, EN ISO 20345:2011, EN ISO 20346:2014, EN ISO 20347:2012 is used for Test Method for Footwear , Safety Footwear , Protective Footwear, Occupational Footwear
  • EN ISO 20349-1:2017, EN ISO 20349-2:2017 is used for checking thermal risk and welding
  • EN 15090:2012 is used for checking safety of firefighter footwear
  • EN 61340-4-3:2018 , EN 50321-1:2018 – These standards are for to check the safety of footwear and also for electrical protection – Insulating footwear and over boots
  • EN 13832-2:2018 standard is used to check the protection against chemical
  • EN 13634:2017 standard is used to check the safety of the motor cycle riders
United States
  • ASTM F 2412-18a , ASTM F 2413-18 standard is used to check safety of toe cap footwear
  • ASTM F2892-18 is used for soft toe footwear
  • NFPA 1971 -2018 is used for Structural and Proximity Fire Fighting
  • NFPA 1977:2016 AMD1-2016 is used for Wildland Fire Fighting
Canada
  • CSA Z195-2014 standard is used to check protective footwear
Australia/ New Zealand
  • AS/NZS 2210 is used for Safety, Protective, Occupational Footwear
  • AS/NZS 4821:2014 Amd1:2015 is used for Footwear for Firefighters
Japan
  • JIS T 8103:2010 is used for Anti-electrostatic footwear

This website uses cookies to ensure you get the best experience on our website. More info.